+ Reply to Thread
Page 188 of 188
FirstFirst ... 88 138 178 186 187 188
Results 1,871 to 1,879 of 1879

Thread: F-35 in all it's Variations

  1. #1871

    And people think Trump is an idiot.

    He's shown more interest in Defence and Defence procurement in the period between the election and the Inauguration than Obama has shown in eight years and if he actually drives real cost reductions in the program then he's a more effective Defence President than his predecessor ever was.
    Unicorn

    It is by will alone I set my mind in motion.
    It is by the juice of sapho that thoughts acquire speed,
    the lips acquire stains, the stains become a warning.
    It is by will alone I set my mind in motion.

  2. #1872
    Senior Member
    Join Date
    Jan 2010
    Location
    Central Europe
    Posts
    777

    That may be so. And isn`t that just a tiny bit scary? If Mr. Trump is perceived as actual or imaginative "successfull", he sets the new acme of excellence for democratic elections and diplomacy by twitter (threats) without legal boundaries.
    It is then only a small step towards leading a country like a company. And although that may not sound bad at first, it is way closer to a plutocracy than a democracy.

  3. #1873

    If his twitter tantrums save Australia meaningful amounts from our F35 buy then I'm all for it.
    Unicorn

    It is by will alone I set my mind in motion.
    It is by the juice of sapho that thoughts acquire speed,
    the lips acquire stains, the stains become a warning.
    It is by will alone I set my mind in motion.

  4. #1874

    January 17/17: Ethical conflicts at Pratt & Whitney have resulted in the ousting of the head of the company’s F135 engine program alongside nine other employees. The dismissals come after the completion of an internal audit which uncovered an ethics issue linked to a visit by South Korean military officials several years ago. During the trip, the Korean delegation paid a visit to the company’s West Palm Beach facility in Florida, and Pratt & Whitney paid for a rental van to fetch them there. While certainly not the most outrageous form of graft in the industry’s history, causing no violation of US export control or anti-bribery laws, the engine company deemed the move as a breach of their strict ethics laws, amounting to “inappropriate entertainment.”

    Sounds more like they were looking for an excuse to get rid of a bunch of people.............ridiculous if they fired a seasoned professional for this non-event!

  5. #1875

    Sure sounds like it.

    I work for one of the levels of government down here and that sort of expense would easily pass the audit and probity hurdles needed to host official visits. If our extremely risk-adverse audit people approve it, then there should be no issue anywhere else.
    Unicorn

    It is by will alone I set my mind in motion.
    It is by the juice of sapho that thoughts acquire speed,
    the lips acquire stains, the stains become a warning.
    It is by will alone I set my mind in motion.

  6. #1876

    Quote Originally Posted by Unicorn View Post
    And people think Trump is an idiot.

    He's shown more interest in Defence and Defence procurement in the period between the election and the Inauguration than Obama has shown in eight years and if he actually drives real cost reductions in the program then he's a more effective Defence President than his predecessor ever was.
    There have been presidents in the past that got involved in procurement. But not at this level, or so it seems. I was thinking Teddy Roosevelt (?) , Thomas Jefferson ?

    cheers

    W
    Kung fu Panda. What can I say? The guy is brilliant.

  7. #1877

    FDR, who pushed the development of the Escort Carrier in the face of the US Navy's reluctance, then forced them to accept the class delivered via mass production methods at shipyards that had never built warships before.
    Unicorn

    It is by will alone I set my mind in motion.
    It is by the juice of sapho that thoughts acquire speed,
    the lips acquire stains, the stains become a warning.
    It is by will alone I set my mind in motion.

  8. #1878
    Senior Member
    Join Date
    Jan 2010
    Location
    Central Europe
    Posts
    777

    Well, both lived in quiet more exceptional times than today wouldn`t you say? Roosevelt had to sail its country with determination through (depending on how you count) the second or third globally waged war in mankinds history and Jefferson had to sail his (yet young) country with diplomacy towards something that can actually be called having a stable governmental system.

    Case in point: we will just have to see what happens.

  9. #1879

    ANALYSIS: Lasers and scanners illuminate F-35 ramp up

    20 January, 2017 SOURCE: Flightglobal.com BY: Leigh Giangreco Washington DC

    As World War II raged, US Air Force Plant 4 cranked out 17 B-24 Liberators a day for the Allied forces. The Lockheed Martin plant in Ft Worth, Texas went on to be the birthplace of the F-111 Aardvark and the F-16 Fighting Falcon. Today, the dwindling F-16 line occupies a smaller facility next door known as the Falcon’s Nest, dwarfed by the colossal space, several football fields long, that is now the F-35 Joint Strike Fighter production line.

    As the production line has matured, Lockheed has streamlined the construction of the three F-35 variants at Ft Worth. Movement of sub-assemblies by crane has gone; now, rail lines connect assembly stations and fighter tails glide above the factory floor. Lasers sterilise fasteners and precision-align parts from disparate international suppliers. Since the first production F-35 rolled out in 2009, touch labour on the aircraft has fallen by 75%.

    Highlights of a FlightGlobal tour of the Ft Worth facility include a look inside the toolbox drawers that electronically track each spanner and drill. An automated drilling machine bores 10,000 holes into the F-35’s outer mould line – over two, 8hr shifts it puts 1,500 holes in the forward fuselage alone, a feat that took about two weeks during F-16 production. The F-35 line is to its F-16 counterpart as the digital age is to the analogue past.


    Company officials dismiss the notion that older aircraft can simply be "painted" to create lower-cost alternatives to the Joint Strike Fighter
    Lockheed Martin


    “When you think about the F-16, there was no digital thread, there were paper drawings,” says F-35 production vice-president Janet Nash. “The F-35 … digital system has the part numbers, has the size, has the tolerance, materials, the specs, all linked digitally, so that it can flow out to the suppliers digitally.”

    Lockheed will mark a new era in 2019 when it expects to achieve a monthly build rate of 17 F-35s, almost seven times the pace of any previous stealth fighter programme. In 2017, Ft Worth should make about 67 jets, reaching a 100 rate during 2018. Production will peak at about 178 fighters a year in 2023, Nash says. In the next three years, Ft Worth will double its workforce.

    “The other piece is parts,” she adds. “We’re working really closely with our suppliers because as we ramp up, that full supply base all have to ramp up at the same time. Actually, they have to ramp up a little ahead because they have to feed us at that rate.”

    The Ft Worth facility is expanding its capacity to produce a maximum of 17 fighters a month, although current schedules show Lockheed reaching 15 to 16 a month, Nash says. At the same time, the production facilities in Cameri, Italy will build two jets a month for the Italian and Dutch air forces. Mitsubishi Heavy Industries’ facility in Nagoya, Japan will build one jet a month for the Japanese air force.

    At its height, the Texas line will swell to 24 final assembly stations, 48 wing positions and 16 electronic mating and alignment system (EMAS) machines. Nine EMAS machines are active today.

    The EMAS machine allows the seamless integration of three mate joints in the F-35’s structure, bringing together a centre fuselage from Turkey or California, a forward fuselage from Ft Worth and an aft fuselage from the UK. A hair’s-breadth gap between any of these components would give away the F-35’s profile on radar. Those sections have to be joined, laser aligned and then pulled apart to examine tolerances, before cleaning and reassembly.

    In another departure from legacy production, Lockheed has employed a flexible overhead gantry machine to make possible the aircraft’s tight tolerances. The towering machine mills out the inner mould line of the forward fuselage, rather than stamping it out of metal. “The width of that seam is absolutely critical. We take over 11,000 measurements as the jet goes down final assembly to measure that gap and make sure it’s exactly correct before it leaves,” nash says.

    REAL WORLD WOES

    But while these extraordinary measures may speed up output and make near-perfection possible, they haven’t entirely eliminated problems. In September 2016, the US Air Force grounded 15 F-35As after a fuel line glitch caused insulation inside the avionics cooling lines to crumble. A Lockheed supplier had used the wrong coating for the insulation, which deteriorated when it met fuel. The supply chain issue affected a further 42 fighters on the production line.

    Lockheed delivered 45 aircraft in 2015 and was supposed to deliver 53 by the end of 2016, but repairs to the polyalphaolefin coolant tubes slowed production. Nash says repairs on the 45 already delivered aircraft should be complete by the end of 2017, and delayed deliveries will be recovered at the beginning of 2018. “We’ll be back on plan next year.”

    While Lockheed plays catch-up with its production goals, industry partners and the government are still striving to drive down the platform’s operational and sustainment costs. The US Department of Defense unveiled a “blueprint” for production affordability at last year’s Farnborough air show, and has now extended it by two years, targeting a per-aircraft price of $85 million. In 2015, Lockheed’s price target for 2019 stood at $80 million.

    The blueprint programme has transitioned several developmental technologies to the production line, including a new laser ablation system that rolled out of the laboratory last March. The laser surface cleaning system began as an industry technology, but Lockheed patented the laser head for the specific F-35 configuration. The company is already eyeing how it could adapt the system into a smaller unit to assist with sustainment in the field.


    The Fort Worth assembly line is the length of several football fields, and makes heavy use of technologies including laser alignment
    Lockheed Martin


    The machine sterilises a nut plate – a fastener that functions like a new-age rivet – to pristine condition. Previously, the surfaces on thousands of nut plates were sanded manually and cleaned with a chemical solvent to assure perfect adherence, Nash says. While the earlier process took four workers to prep one wing in four hours, laser ablation enables workers to prep the surface in two hours and then install the nut plates. Laser ablation hasn’t cut down the number of workers needed to install the nut plates, but has reduced quality issues downstream.

    “The savings is beyond this area. We don’t have to do repairs and fixes down the line,” Nash says. “So it improves with defect reduction because they appear perfectly first time, every time.”

    In the future, Lockheed could develop a new kind of fastener that doesn’t require ablation, says Don Kinard, a senior technical fellow at Lockheed handling the F-35 fighter production system. Kinard is charged with finding cost savings for the F-35 line, but has his eye on forward-looking technologies such as augmented reality that could streamline future fighter production.

    “What I’d really like to do is install fasteners from one side with a robot, rather than having two people at a time doing that,” he says. “It would be a blind fastener, it would install from one side and then when you twisted it, torque it, it breaks off the stem and clamps the structure.”

    AFTER THE RAPTOR

    On a radar map, a 747 would appear the size of a hot air balloon and an F-16 would look like a beach ball. Drill down to legacy stealth aircraft and Lockheed’s F-117 Nighthawk would show up as a golf ball while an F-22 Raptor might appear as a pea. With the F-35, Lockheed is getting down to pebble size, according to Robert Wallace, senior manager for F-35 flight operations.

    Wallace, a former chief of low-observability for the US Air Force’s B-2 bomber, says the F-35 has leveraged LO qualities from the bomber – but he could not elaborate on specifics.

    Pilots will see a more advanced low-observable signature on the F-35 versus the F-22, but it’s the maintainers who see the greatest leap in durability. Each time a fighter returns from flight, maintainers must bring the aircraft’s stealth signature back to its original fidelity. But a fighter confronts more demanding missions than a bomber, pulling 9g while flying from hot, desert environments to high, cold altitudes.

    “This is one of the paradigms the maintainers have to get their heads around,” he says. “[With] previous airplanes, the skin of the airplane was just the skin of the airplane. Now they have to understand the skin of the airplane is another system on the airplane. So when you’re maintaining something like this it’s not just paint, it’s a system of systems on board the airplane that has to be factored in.”

    The secret to an aircraft’s low-observable signature doesn’t lie in a stealthy skin alone but in the shape, Wallace adds. Just one week before Donald Trump called Boeing to price a Super Hornet against the F-35, Wallace refuted a repeated claim that the F-35 could be substituted with a less expensive fighter covered in a stealth coating.

    “I know a lot of people say, ‘Oh let’s just buy more [F-15] Eagles and F-18s and F-16s and make them stealthy’,” he says. “But the three keys to stealth are shape, shape and shape.”

    On the F-35, the smooth surface at the nose begins to give way to a serpentine shape with a large bump protruding before the engine intake. That bump is the first line of defence against radar, although Lockheed has also buried the F-35’s engine in the back of the aircraft to ensure its blades are hidden.

    While the shape is created when the centre fuselage is made, the coating that completes the LO system comes into play with help from a machine called Thor. Named after the Norse god of thunder, the new robot has revolutionised the application of stealth coating on the Lightning II.

    In the past, Lockheed coated the inlet bump through a repetitive process that involved spraying, drying and manual measuring, followed by more spraying. Where it once took Lockheed several hours to apply coatings near the inlet ducts that give the F-35’s inlet its low-observable characteristics, the Thor robotic system injects coatings directly on to the aircraft. The rest of the jet’s coating is applied by three other robotic spray devices.

    Rick Luepke, a technical fellow at Lockheed and Thor’s inventor, began the project with government seed funding but developed the tooling and processes with both the government and Northrop Grumman, as part of the blueprint for affordability initiative. The blueprint initiative invested $742,000 into Thor and Lockheed estimates the robot will save $6,000 per jet and $27 million over the life of the programme.

    Lockheed rolled out Thor a year ago and the machine has halved the time to finish the LO moulding on the inlet, Kinard says. The robot is capable of finishing one side of the fighter at a time, but Lockheed is adding a second machine, aptly named Loki – another Norse god and now a Marvel Comics character who is a sometimes enemy of Thor – to finish both sides simultaneously.

    The machine uses three cameras to scan a 3D image of the aircraft, which allows the robot to locate the aircraft surface for the injection process. Once the injection finishes, the system shuts down and waits an hour to allow the material to gel. Thor then heats the injection tool to 65.5˚C (150°F) and cures the low-observable material on to the aircraft.

    The robot then scans the inlet once more and compares the initial and final scans to derive the thickness of the material. A colour map is projected on to the aircraft’s surface, to determine whether an area is too thick or thin. Thick areas appear red, thin coatings show blue and intolerance spots are green.

    Lockheed is currently working on a new optical scanner, which will update the colour map every minute and a half, Kinard says.
    Luepke adds: “We’re using this colour map as a visual for the finishers to be able to sand what they need to sand to get the coating to the final tolerance. But what we’re working toward is a real-time update on the colour map. As they sand it turns colour.”

    The current scanner must take several overlapping shots of the inlet to scan the entire area. The new system will be able to scan the same area in a single shot. That will slash scanning time from 20min to 90sec, Luepke says.

    Lockheed could not have even approached concepts like Thor with previous production lines. By the time Lockheed delivered its final F-22 to the USAF in 2012, the company had produced 187 of the fighters. That’s a sizable fleet, but a paltry number compared with F-35 production.

    “With F-35 being a long production run, this kind of stuff is possible,” Kinard says. “The fact that we have all these aircraft on a single assembly line allows us to apply the technologies to all the variants and they can all share that learning.”

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts