PDA

View Full Version : UK Light Weaponry Displayed



buglerbilly
30-01-10, 01:09 AM
UK forces' light weaponry showcased at MOD HQ

An Equipment and Logistics news article

29 Jan 10

The latest developments in the wide range of light weapons available to British troops operating in Afghanistan were put on display at the MOD's Main Building in London this week.


Light Weapons Event held in the Memorial Courtyard, MOD Main Building, on 27 January 2010
[Picture: Harland Quarrington, Crown Copyright/MOD 2010]

The Memorial Courtyard of the MOD's London headquarters was temporarily transformed into an arsenal as the Ministry's Defence Equipment and Support section and their industry partners, who are responsible for the provision and management of the world-leading kit, showcased their wares.

The spectrum of small arms currently in use by British forces which was on display included the hand-held Sig Sauer 9mm pistols, the latest Sharpshooter rifles, long-range sniper rifles, .50-calibre heavy machine guns, and some new weapons that are still undergoing trial.

Displayed alongside the weapons themselves was a range of the latest complementary accessories, including optical sights of varying magnification, image intensification (II) or 'night vision', and thermal imaging (TI) technology, and even a man-portable laser targeting system.

The equipment is procured for British troops by Defence Equipment and Support's (DE&S's) Light Weapons, Photographic and Batteries and Dismounted Soldier Systems Teams who are also responsible for the testing of, training on, and through-life servicing (including any required modifications) of, the kit.

Colonel Peter Warden, the Light Weapons, Photographic and Batteries Team Leader, said:

"Everyone takes interest in the UORs [Urgent Operational Requirements] and the new equipment coming in for specific purposes, but there's a whole lot of other activity that goes on, on a daily basis, to maintain and look after and improve the fleet of weapons that we have.


A selection of thermal imaging sights from British manufacturer Qioptiq
[Picture: Harland Quarrington, Crown Copyright/MOD 2010]

"People don't quite realise just how much kit we have to manage; and obviously the numbers are increasing all the time, along with the ramp-up in terms of what we're doing on operations."

Col Warden also explained how essential keeping up-to-date on weapons technology is:

"The small arms market across the world is constantly evolving, and we need to make sure we keep up with that, and we're at the front foot," he said.

"We're well up-to-speed in terms of what technologies are coming along; the use of polymers, ceramics, the changes in the way we configure the weapons, and the adaptability we now have."

No one piece of kit is as personal to a foot soldier as his or her service weapon; it is what defines them and will protect them during battle.

The DE&S teams recognise this, working closely with Service personnel to develop their weapons, and endlessly striving to make improvements, wherever possible, based on feedback received from the end users - the soldiers on the ground.

The main focus of the developments centres around the size, weight, range and accuracy of the weapons, but ergonomics and customisability - tailoring a weapon to the individual - is the direction that the teams are increasingly working towards.

The DE&S teams use weekly reports from Afghanistan and debrief sessions with recently-returned units to gauge the effectiveness of their efforts as well as any areas for improvement.


A new .50-calibre semi-automatic variant of the sniper rifle, capable of putting a hole in a tank or taking down a helicopter from an extreme range
[Picture: Harland Quarrington, Crown Copyright/MOD 2010]

Major Toby Barnes-Taylor, Chief of Staff of the Individual Capability Group, explained how feedback received from front line troops in Afghanistan today is directly influencing the evolution of their weapons:

"In the unique perversities of theatre, where you are going out for extended periods of time, the soldiers get tired. A man will happily operate for eight, 10, 12 hours, but when you ask him to do 18 to 24 without moving, things start to ache.

"We found that with the integration of the SA80 rifle with the helmet and body armour that is used in theatre, the soldiers, after many hours, found that their wrists started to ache chronically and they couldn't get a stable fire position because of the normal foregrip.

"Therefore we went out and procured what is known as a Picatinny rail quad rail, which replaced the entire furniture at the front of the rifle, and, with a down-grip, looks like a gangster grip out of the 1940s movies, so that essentially totally alters the dynamic of how the soldier holds it and gives his arms greater chance to rest and therefore work better for longer."

The team uses the latest Computer Assisted Design (CAD) packages and a dedicated Human Factors Interface Team to swiftly evaluate every proposal, ensuring any modifications are scientifically implemented to integrate with existing kit, and will have maximum benefit to the end user.

Maj Barnes-Taylor says that his team's dedication and professional ethos are mirrored in their business partners:

"Together with the MOD, the traditional Defence industrial partners, such as those we have here today, are utterly unified in their overall desire to support the man on the ground; so they are as keen as we are to find any solution to any issue that is raised."


A range of small arms on display in the MOD Main Building on 27 January 2010
[Picture: Harland Quarrington, Crown Copyright/MOD 2010]

One of the weapons on display was the recently unveiled L129A1 Sharpshooter rifle, the first new infantry combat rifle to be issued to troops for more than 20 years.

Once again, its introduction, under a UOR, was a direct response to meet the requirements of battlefield commanders on the front line in Afghanistan:

"The standard rifle has an effective range of three to four hundred metres, and we now find that, because of the terrain and environment, and the Taliban, that the threats can stem from 20 feet [6 metres], all the way out to 900 metres plus, in the direct fire of a contact battle," said Maj Barnes-Taylor.

The Sharpshooter's considerable range takes it into the realm of sniper territory, but it requires far less training, being more similar to the standard service rifle than the highly-specialised weapons used by those in the sniper profession:

"The Sharpshooter rifle is designed for a generalist soldier who is a good shot, so it is designed far more for a man to be able to switch his weapon and use it without months of specialist training," said Maj Barnes-Taylor.

"Therefore, we have to ensure that general soldiers, those who are not specially trained, who have not gone through the months of sniper schools, have a weapon that can defeat an enemy up to that range, and this weapon is designed specifically to do that."


Visitors get their hands on the new Beretta combat shotgun
[Picture: Harland Quarrington, Crown Copyright/MOD 2010]

One of the best-established weapons on display was the formidable .50-calibre heavy machine gun.

Usually mounted to a vehicle, such as a WMIK Land Rover or Jackal, the '50 Cal' can knock holes through the thick compound walls found across Afghanistan with ease.

Phil Mouser, of Manroy Engineering Ltd, explained a major recent development to the '50 Cal' - the quick-change barrel:

"In the old days we had a standard barrel, and it could take 10 minutes for a barrel change ... the quick-change barrel cuts that 10 minutes down to just 10 seconds," he said.

In the midst of a firefight, that sort of improvement could change the outcome of a battle, potentially saving the lives of British troops on the front line.

[Somewhat bizarre comment that considering the UK has been making .50cal QCB's for years now!]

So what's next for the Light Weapons team?

"We've got to start thinking, soon, about the replacement for SA80," said Col Warden. "The out of service date begins to happen in about eight to ten years time. It was introduced in 1986 and so we need to start really thinking about why and how are we going to replace it, what with, and some discussion about the calibres that you want for the future.

"Do we modify it and keep it going for longer? So there's an option there to keep going with what we've already got, or maybe see where we can improve. It's a debate that's just about to start I think."

buglerbilly
18-03-10, 03:22 PM
Another MoD Showcase session.................

The Cutting Edge of Force Protection – Industry Showcases Present and Future Technologies

(Source: UK Ministry of Defence; issued March 17, 2010)

Cutting edge armoured vehicles, counter-Improvised Explosive Device (C-IED) robots, Unmanned Aerial Vehicles (UAVs) and blood transport units are all on display at a major event to mark National Science and Engineering Week.

The event, organised by the Defence Industries Council (DIC) and the Ministry of Defence (MoD), is part of an annual series of events celebrating science, engineering and technology. The event gives an insight into current technologies being deployed in support of the Armed Forces, as well as a forward look at the scientific innovations which may one day add to the current impressive range of tools affording military personnel a battle-winning edge.


Cut-away image of a new hard armour plate, 'MAX-1', designed to withstand up to nine hits from high powered armour piercing bullets
[Picture: VestGuard UK]

Opening the event at Yeomanry House in London, the Minister for Defence Equipment and Support Quentin Davies said:

“Today’s event celebrates the vital work of scientists, engineers and inventors who have helped cement the UK’s position as a world leader in science and research. Their discoveries are reaping benefits for the Armed Forces and civil society, helping to improve and protect lives.”

Industry exhibitors at the event are joined by Armed Forces personnel who are already benefiting from the latest cutting edge technologies in the field. These included personnel from 29 EOD and Search Group and RAF UAV specialists, who recently combined ground technology and UAVs in Afghanistan to continually guard against threats such as IEDs.


The CUTLASS robotic vehicle is being developed by Northrop Grumman for the UK MOD as the next generation unmanned ground vehicle for bomb disposal operations
[Picture: Northrop Grumman]

Rear Admiral Rees Ward (Rtd), Chief Executive Officer of Aerospace, Defence and Security and Secretary of the Defence Industries Council, said:

“This event is an excellent opportunity for the defence industry and the Ministry of Defence to demonstrate how we are working together to use the best of British innovation and technology to provide the best possible protection to our armed forces. We also hope that young people reading about the high-quality, high-tech kit on display will be enthused and encouraged to get involved in science, technology and engineering an go on to pursue successful careers in the industry.

“The ‘Defence Matters Campaign’ which has worked with the Ministry of Defence in organising this event, aims to inform people around the UK about the contribution the defence industry makes not just in terms of supporting our Armed Forces with the best equipment and service support available but also in terms of its economic contribution. The defence industry is a provider of over 300,000 high-value engineering jobs across all regions of the country, in companies of all sizes, a small number of whom we see represented here today. I’d like to thank those companies who have made the effort to come and take part in this exhibition; many of the technologies they have put on display are state-of-the-art and the Armed Forces deserve nothing less.”

Every year the UK Defence sector recruits many hundreds of science and engineering graduates. The MOD has a 13,000 strong workforce of engineers and scientists – forming the Defence Engineering and Science Group (DESG). These specialists are involved at every stage from the research and development of new technologies through to their procurement and readiness for the front line. Indeed, the MOD has deployed more scientists to the front line in recent operations than at any time since the Second World War.

BACKGROUND NOTES:

1. Exhibitors at today’s event were: Amsafe, BAE Systems, Defence Science and Technology Laboratory (DSTL), Fenton Pharma, Finmeccanica/Selex, Force Protection, General Dynamics, Milsys, NAR Group, Northrop Grumman, Ovikom, Oviks, Prometheus, QinetiQ, Raytheon, Supacat, Cobham, Thales, Universal Engineering and Vestguard.

2. National Science and Engineering Week (NSEW) is a ten day programme of science, engineering and technology events and activities across the UK aimed at people of all ages, now in its 17th year. National Science and Engineering Week is funded by the Department for Business, Innovation and Skills and works in partnership with Engineering UK.

3. Further information about the:
-- Defence Engineering and Science Group (DESG) is available at www.desg.mod.uk
-- The Centre for Defence Enterprise’s website is at: www.science.mod.uk/engagement/enterprise

-ends-